|
TS3's Configuration
 The TS3
is only available in one configuration at present.
This is:
-
Epoxy / Glass vacuum bagged hull and deck
-
Carbon fibre 84mm parallel keel using a 6% airfoil
section designed for low reynolds numbers
-
Straight tapered, carbon fibre rudder using the same
6% airfoil section used on the keel
-
360 mm long bulb made from lead with 6% antimony for
added strength and a brass rod at the training edge
for strength in that area
-
The keel case and forward web are integral with
mountings for the steering servo and winch as part of
the moulding
-
Cockpit hatch is the Decor style hatch and it
provides access to the electrics, servo and winch
-
The boat is setup to have an under deck switch which
is turned off by placing a bar magnet on top of the
Decor hatch. Removing of the magnet turns the
electrics back on.
-
All deck fittings are installed ready for the
electrics and rigs to be fitted.
The photos on this page give an idea of the boat.
 
 
|
